Charging Using Battery Charger - Kenworth Y53-1024 Operator's Manual

Charging using Battery Charger

Positive (+) Charging Terminal
Negative (-) Charging Terminal
Attach a battery charger to the charging terminals and charge batteries until
system voltage is restored. Refer to "Battery Charging" in the Kenworth
Operator's Manual for proper battery charging procedures.
- 14 -
Caution: Do not attempt to jumpstart the vehicle.
Terminals are for use with external battery char-
ger only. For charging instructions, see top of
main battery box cover or the kenworth Clean
Power operator's manual supplement/service
manual.
Positive (+) and negative (-) charging terminals for are located above the
frame rail, behind the sleeper, on the driver's side of the vehicle.
Y53-1024 12/06
Electric Power System
Kenworth