Inverter/Charger Switch - Kenworth Y53-1024 Operator's Manual

Electric Power System
WARNING! The Shore Power electrical system
can cause fires resulting in personal injury and/
or property damage if not properly maintained.
Regularly inspect the Shore Power truck wiring,
AC extension cord, plugs, and connectors for
damaged or frayed wiring. Do not use the Shore
Power system if there are any signs of problems.
Contact your authorized Kenworth Dealer if you
are in need of repairs or information.
The Kenworth Clean Power System enables you to access 120-Volt AC
power from two different sources. A Shore Power connection allows access
to an outside power source and an electrical inverter system can produce
120-Volt AC from the Main Batteries.
Kenworth

Inverter/Charger Switch

SET position), the inverter/charger will be off and the green electrical outlet
symbol on the switch will turn off. Refer to the Inverter/Charger Indicator
chart on the next two pages for Reset information.
Y53-1024 12/06
The 120-Volt AC system function is controlled by
the Inverter/Charger Switch located on the Sleeper
Control Panel.
When the top of the switch is pressed, (NORMAL
position) the inverter/charger is on and the green
electrical outlet symbol on the switch will turn on.
This is the normal operating position for the invert-
er/charger.
When the bottom of the switch is pressed (OFF/RE-
- 21 -