Electrical System Monitoring - Kenworth Y53-1024 Operator's Manual

Electrical System Monitoring

Ammeter
(Optional)
Voltmeter
Normal system voltage
Kenworth Clean Power System is between 13.5 and 14.6 -
Volts. This is slightly
Kenworth Clean Power System.
All vehicles come equipped with a dash-mounted voltmeter. Some vehicles
may be equipped with an optional ammeter as well.
- 1 -
200
15
12
250
150
18
9 300
100
VOLTS
on vehicles equipped with
higher than vehicles without
NOTE: These gauges monitor the Main Batteries,
not the Starter Batteries.
An indicator lamp on the face of the voltmeter will illuminate if system volt-
age reaches 15.0 -Volts. This is considered an over voltage condition. If
this occurs, contact the nearest authorized Kenworth repair facility.
the
the
Y53-1024 12/06
Electric Power System
Kenworth