Air Conditioning/Heating Switch; Temperature Control Dial - Kenworth Y53-1024 Operator's Manual

Air Conditioning/Heating Switch

Heat ON Position
Turn the Air Conditioning/Heating Switch to the On position.
NOTE: A flashing RED lamp indicates a system fault.
Contact the nearest authorized Kenworth repair
facility.
- 2 -

Temperature Control Dial

Rotate the Temperature Control Dial clockwise to the Heating Mode. Rotat-
ing the dial in a clockwise direction (reds band on dial) increases both the
temperature and the Fuel-Fired Heater fan speed simultaneously.
NOTE: The sleeper heater has its own vent and fan
which are separate from the Sleeper Vents and Fan
Control Dial. Even though the heater fan is controlled
by the Temperature Control Dial, the Fan Control Dial
can also be used to move heated air throughout the
sleeper by setting the Fresh\Recirculation Air Switch
to the Recirculation position.
Y53-1024 12/06
Heating and Air Conditioning System
Heating
Mode
Kenworth