Label Installation - Sony Ericsson W880 Working Instruction, Mechanical

Working Instruction, Mechanical

3.2.2 Label Installation

N
O MORE THAN TWO LABELS ARE ALLOWED STACKED ON TOP
. I
OF EACH OTHER IN THE BATTERY CAVITY F THERE ARE
,
ALREADY TWO LABELS PRESENT PERFORM THE LABEL
.
REMOVAL PROCEDURE BEFORE CONTINUING
If a new label has not been created yet, then do so at this
time.
W ,
HEN INSTALLING A NEW LABEL BE VERY CAREFUL TO AVOID
TOUCHING THE CONTACTS OF THE BATTERY CONNECTOR WITH
.
THE ADHESIVE SIDE OF THE LABEL
Using style 2A tweezers, place the end of the label that is
adjacent to the battery contacts first. Then roll the rest of
the label down onto the floor of the battery cavity.
Once the label is correctly positioned, carefully smooth it
into place.
Starting at section 4.1.5, perform the remainder of the
reassembly procedure.
3/000 21-1/FEA 209 544/123 A 18(61)
©
Sony Ericsson Mobile Communications AB