Working Instruction, Mechanical
Work the camera key into its opening in the new back
cover.
Verify the camera key's two alignment tabs are positioned
in the back cover as shown.
To remove the RF port plug from the old back cover, press
on the inside surface of the plug until the plug pops out of
its opening.
Insert the RF port plug in the opening in the new back cover
and press it into place.
T
RF
HE
PORT PLUG SHOULD BE FLUSH WITH THE
SURROUNDING BACK COVER WHEN CORRECTLY INSTALLED
3/000 21-1/FEA 209 544/123 A
47(61)
©
Sony Ericsson Mobile Communications AB