Sony Ericsson W880 Working Instruction, Mechanical page 58

Working Instruction, Mechanical
Install two screws in the front cover and tighten with a
torque driver set to 20 N*cm and a T6 bit.
Install two screws in the back cover and tighten with a
torque driver set to 20 N*cm and a T6 bit.
Install two rear screw plugs by inserting them into the rear
screw cavities. Press on the rear screw plugs to make sure
they seat fully.
Obtain a new co-brand label and remove it from its
protective backing.
Using style 2A tweezers, install the new co-brand label in
co-branding cavity on the front cover.
Make sure the co-brand label is positioned within its
cavity.
3/000 21-1/FEA 209 544/123 A 58(61)
©
Sony Ericsson Mobile Communications AB