Table of Contents
Advertisement
APOLLO
The 911 Siren is included with all Apollo ETL Gate Operators.
Mount siren in an area that will produce maximum performance (additional wire may be required).
Connect the red wire to the SIREN connector on the Remote Monitor Output Connector block.
Connect the black wire to the GND connector on the Remote Monitor Output Connector block.
Set Program Switch # 4 as preferred:
ON - Upon activation, Siren will start for 5 seconds before gate(s) begin moving.
OFF - Siren and gate(s) start immediately upon activation.
Gate Operators, Inc.
911 Siren
Red
Black
21
Advertisement
Table of Contents
Need help?
Do you have a question about the HYPPOETL and is the answer not in the manual?
Questions and answers