Panasonic KX-TD1232 User Manual page 200

Troubleshooting for DECT Portable Station
Problem
The PS does not work.
The PS does not operate.
The PS does not ring.
You cannot dial.
Static, sound cuts in/out, fades.
Interference from other electrical
units.
"CS Busy" is displayed.
"FAULT" is displayed.
"PS NO CONNECTED" is displayed.
"REGISTER UNIT" is displayed.
"NO SERVICE" is displayed.
• The battery is empty.
á Charge the batteries fully. (+ P. 5-5)
• The PS has been cancelled or the PS has not been
registered.
á Consult your dealer.
• The power switch is OFF.
á Turn it ON. (+ P. 5-7)
• Ringer volume is set to OFF or VIBRATION.
á Set to ring by pressing the Volume Control button.
(+ P. 5-7)
• The PS is out of range or the Cell Station (CS) is busy.
á Move closer to the CS or try again later.
• The radio channel is busy or a radio communication error
occurred.
á Try again later.
• The number which you dialled is restricted by the system.
á Consult your dealer.
• The key lock mode is set.
á To cancel the mode, press the Function for about 2
seconds. (+ P. 5-25)
• The radio channel is busy or a radio communication error
occurred.
á Try again later.
á Set the PS and CS away from other electrical appliances.
á Move closer to the CS.
• The radio channel is busy.
á Try again later.
á Consult your dealer.
• The power switch is set to OFF.
á Turn it ON. (+ P. 5-7)
• The PS is out of range.
á Move closer to the CS.
• The radio channel is busy or a radio communication error
occurred.
á Try again later.
• The PS is not registered in the system.
á Consult your dealer.
• The PS is out of range.
á Move closer to the CS.
Remedy
Appendix 6-5