Entering The Programming Mode - Panasonic KX-TD1232 User Manual

Procedure
The basic steps are shown below.

1. Entering the programming mode

PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
2. Programming
programme no.
Enter programme Press NEXT.
number (3 digits).
• To delete or change an entry, press CLEAR (TRANSFER).
• To confirm your entry after storing data:
– The STORE button light: Lights red.
– Conf rmation Tone: One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
• To exit the programming mode at any time, lift the handset.
3. Exiting the mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
user password
Dial . Enter user password.
SKP +
OR
Press SKP+. Press SKP-.
your entry
NEXT
Enter your entry
NEXT
Press NEXT.
Press SELECT.
SKP –
To continue programming
To end
STORE
Press STORE.
To continue entering selections
PREV
OR
Press PREV.
SELECT
To go to the next/previous programme or entry.
To enter the desired programme or entry.
Customising Your Phone & System
END
Press END.
4-11