Battery Charge - Panasonic KX-TD1232 User Manual

Battery Charge

You need to charge the battery before initial use and when the battery strength becomes low. When
" " f ashes or beep tones sound every f ve seconds during a conversation or "BATTERY EMPTY" is
displayed, recharge the battery or replace with a fully charged optional spare battery. If not, the call will
be automatically disconnected in three minutes.
Standard Battery Life
If your Panasonic battery is fully charged [provided 25 °C]:
While in use (Talk mode)
While not in use (Stand-by mode)
To install a battery
Hook the bottom of the battery on the PS, and
place the battery until it clicks.
To charge the battery
1. Connect the charger to a power outlet using the AC adaptor.
2. Slide the battery-attached portable station or the battery in the charger.
• Charge the battery for about 1.5 hours.
• When charging is completed, the charge indicator will change from orange to green.
Charger
• The battery is used while the PS 's power is ON.
• Battery life may vary depending on usage conditions and
ambient temperature.
• Please use only a Panasonic battery.
• Do not let the charged battery's electrodes touch metallic
objects. The terminal may short and overheat, causing
burns.
• Clean the charge contacts on both the PS and the charger
with a soft cloth once a month, or the battery may not
charge properly.
• The PS can receive calls even while charging.
• You need not worry about overcharging.
Up to about 10 hours
Up to about 100 hours
Cord holder
To power outlet
(230 VAC, 50 Hz)
AC adaptor
!!
!!
• The AC adaptor is used as the main disconnect
To replace a battery
Set the power switch to OFF f rst to prevent
memory loss, and then remove the battery
while pressing the tab.
Charge indicator
device. Ensure that the socket-outlet is located
near the equipment for easily access.
DECT Portable Station 5-5