Panasonic KX-TD1232 User Manual page 161

Operation
Calling an external party
You have to seize an outside line before dialling an outside phone number because external calls are
made via your system.
Select one of the following methods:
F1-F3
• Press an idle
• Dial automatic line access number
An idle line is selected automatically.
• Dial outside line number
A specific line is selected.
N Using a Flexible CO button
PT and SLT PS
F1-F3
(CO)
Press CO.
N Using automatic line access number / outside line number
PS PS
Press TALK.
• You can also finish the conversation by placing the PS
on the charger or pressing TALK button.
• If " " flashes, move towards the Cell Station until the
sign stops flashing and try again.
• Emergency call
You can dial pre-programmed emergency numbers
without any restrictions.
(Default: 999, 112)
Customising Your PS
• PBX Programming – Customising the Buttons
Create or re-arrange the Loop-CO button, Group-CO
button and Single-CO button.
5-10 DECT Portable Station
button.
(CO)
WXYZ
to
TUV
phone no. phone no.
Enter phone number.
WXYZ
OR OR
TUV
to to
TUV TUV TUV
Seize an external line
(9 or 81-88).
.
.
TUV TUV
C
Talk. Press CANCEL.
phone no. phone no.
Enter phone number. Enter phone number.
!!
!!
• To select the less expensive line
automatically, dial "9" or press the Loop-CO
button to seize a line. (LCR = Least Cost
Routing) F1 button is already assigned as the
Loop-CO button.
• Confirming the dialled number before
connecting
You can go off-hook after confirming the
number you dialled. If you misdial, press the
CLEAR button to clear each number from the
right.
• If you go off-hook first and then misdial,
press the FLASH button and enter the number
again.
• Call information
The following information can be referred to by
repeatedly pressing the CO button in use.
– Phone number (outgoing call) or
call duration (incoming call)
– Meter
C
Talk. Talk. Press CANCEL.
– Call charge