Table of Contents
Advertisement
Replacing Consumables
Replacing Staple Cartridge
1
3
Replace Staple Waste Container
1
1:
Ensure machine is idle. Open the Right Door on the Finisher. Push the R5 lever to the
left to unlock it, and then pull out staple waste container.
2:
Align the bottom of the new staple waste container onto the support shelf.
3:
Push the staple waste container into the machine until it clicks into place. After a short
delay, the new container will lock automatically and close the Finisher door.
Replacing Staple Cartridge (Booklet Finisher)
1
1:
Open Finisher Front Door. Pull Booklet Maker access handles and pull out Stapling Unit.
2:
Squeeze the handles and pull to remove the used cartridge. Unpack and install the new
cartridge. The cartridge will click into place when it is installed correctly.
3:
Return the Stapling Unit to its original position. Close the Finisher Front Door.
2
4
2
2
1:
Ensure machine is idle. Open
the Right Door on the Finisher.
2:
Grasp Staple Cartridge handle
located at R1 and pull out
cartridge.
3:
Push the position indicators
located at both sides to remove
staple case from cartridge.
Remove empty staple case &
insert new staple case into the
Staple Cartridge. Remove the seal
that is attached to the case.
4:
Close bottom of the cartridge
until it clicks into place. Push down
cartridge until it clicks into place
and close Right Door.
3
3
38
38
Advertisement
Table of Contents
