Table of Contents
Advertisement
2
F
eatures
Pushbutton Wake Up Mode: Refers to
the state when both engines are OFF,
the gauges are shut down, and the
operator pushes the "M" button to see
the clock. This mode only lasts for 5
seconds and then enters sleep mode
Power up and Basic Function: The
gauge system will power up upon
engine start. A greeting will flash on the
screens, the gauge needles will sweep
and return to zero, the LCD will flash,
and the audible alarm will sound.
Master Gauge LCD (Starboard): Dur-
ing normal operation, the master gauge
LCD displays two lines of data (unless
in large font mode). Press the M button
to select a parameter. Each press of
the M or T button will display a different
parameter. To keep the parameter on
the line, simply do nothing and the
reverse video will disappear and the
parameter will remain. To change to
the other line on the display, press the
M and T buttons simultaneously when
either line is highlighted. Scroll with the
M or T button separately.
& F
unctions
Displayable Data Include:
GPS Speed - Engine RPM - Fuel Level
- Gallons Per Hour (GPH) - Gallons
Used - Voltage - Engine Hours - Wa-
ter Temp - Water Depth - Trip Odom-
eter - Latitude - Longitude - Heading (if
selected) - Compass (if selected) -
Elevation - Highest Speed - MPG -
Cruise Assist - Auxiliary Battery (if
installed) - Time (The clock can be
accessed when the engines are off by
momentarily pressing the M button.)
Accessing the System Menu:
•
To access and display informa-
tion residing in the master gauge
press the M button for more than 3
seconds. Use the M or T button
separately to scroll.
•
To access a category, press and
release the M and T buttons
simultaneously.
•
To exit, simply do nothing and
the system will return back to the
original two-line display.
1) Set Units: Display information as
English or Metric.
• Press the T button to toggle
between English or Metric.
• To exit, press the M button or
simply do nothing.
2-10
Advertisement
Chapters
Table of Contents
