Yamaha AR240 HO Owner's Manual page 110

4
M & c
aintenance are
Connecting the Battery Terminals
Always make sure the connections are
correct when you install the battery in
the boat. Make sure that the breather
pipe is properly connected and that it is
not damaged or obstructed.




 Positive (+) Battery cable (Red)
 Negative ( – ) Battery cable (Black)
 Accessory (+) Lead (Red / Black)
 Accessory (–) Lead (Black)
NOTICE:
BATTERY REMOVAL: Disconnect
battery leads before removing the
battery. Disconnect the negative (–)
lead first.
BATTERY INSTALLATION: Connect
the red (+) lead and accessory red
(+) lead to the positive (+) terminal
of the battery. Connect the black (–)
lead and the black (–) accessory
lead to the negative (–) terminal of
the battery.
4-16