Checking Front Brake Calliper Pads; Checking Rear Brake Calliper Pads; Pad Wear; Pad Cleaning - Husqvarna TR650 STRADA Owner's Manual

CHECKING BRAKE PADS FOR WEAR

Checking front brake calliper pads.

- Place the motorcycle on the stand.
- Visually inspect the state of the brake pads (1) from the
rear of the calliper;
1
A = 1 mm

Checking rear brake calliper pads.

- Visually inspect the state of the brake pads (2) from the
rear of the calliper;
2
A = 1 mm
SPECIFICATIONS - OPERATION - MAINTENANCE

PAD WEAR

Check brake pad wear.
Service limit " A" is: 1 mm (0.04 in).
If this limit has been exceeded or even if one of the wear
indicators is no longer visible, replace both brake pads.

PAD CLEANING

Be careful that no brake fluid or any oil gets on brake
pads or discs. Clean off with alcohol any fluid or oil that
inadvertently gets on the pads or disc. Replace the pads
with new ones if they cannot be cleaned satisfactorily.
EN - 37