Clock Adjustment; Setting Units Of Measurement - Husqvarna TR650 STRADA Owner's Manual

CLOCK ADJUSTMENT

The clock must be set when the motorcycle is stationary
and the key is set to ON.
The clock is set to 24 hours.
- Press the "S" button (1) until the word "CLOCK" ap-
pears on the display.
1
- Press the "S" button for more than 4 seconds and the
hours will flash on the display.
- The value of the hours increases by one unit each time
you press the "S" button.
- The value of the hours decreases by one unit each time
you press the "M" button.
> 4"
4"<
- Press the "S" button for more than 4 seconds to memo-
rise the hours set and the minutes will flash on the
display.
- The value of the minutes increases by one unit each
time you press the "S" button.
- The value of the minutes decreases by one unit each
time you press the "M" button.
- To memorise the time once you have set it, press the
"S" button for more than 4 seconds. If not, the setting
is automatically memorised after 10 seconds.

SETTING UNITS OF MEASUREMENT

The units of measurement must be set when the motorcy-
cle is stationary and the key is set to ON.
- Press the "S" button (1) until the word "ODO" or
"TEMP" appears on the display.
1
- Press the "S" button for more than 4 seconds. The word
"SET" appears on the display and the unit of measure-
ment currently in use.
- Press the "S" button once to change the unit of meas-
urement. Once you have selected the unit of measure-
ment, press the "S" button" for more than 4 seconds to
confirm the set data and go onto the next scale.
The following units of measurement can be set:
Km / mp = the display will show:
- the speed in "km/h" or "mp/h" ;
- the total distance covered in "km" or "mp"
- the partial "TRIP" distance covered in "km" or "mp".
Temperature = °C / °F
Quantity of fuel:
L = (litres) - UG = US/GAL - IG = IM/GAL
- To quit the "SET" stage once you have made your last
setting, press the "S" button for more than 4 seconds. If
not, the program automatically quits after 10 seconds.
SPECIFICATIONS - OPERATION - MAINTENANCE
> 4"
> 4"
> 4"
EN - 15