Clock adjustment
The clock must be set when the motorcycle is stationary
and the key is set to ON.
The clock is set to 24 hours.
- Press the "S" button (1) until the word "CLOCK" ap-
pears on the display.
1
- Press the "S" button for more than 4 seconds and the
hours will flash on the display.
- The value of the hours increases by one unit each time
you press the "S" button.
- The value of the hours decreases by one unit each time
you press the "M" button.
> 4"
4"<
- Press the "S" button for more than 4 seconds to memo-
rise the hours set and the minutes will flash on the
display.
- The value of the minutes increases by one unit each
time you press the "S" button.
- The value of the minutes decreases by one unit each
time you press the "M" button.
- To memorise the time once you have set it, press the
"S" button for more than 4 seconds. If not, the setting
EN - 14
SPECIFICATIONS - OPERATION - MAINTENANCE
is automatically memorised after 10 seconds.
Setting units of measurement
The units of measurement must be set when the motorcy-
cle is stationary and the key is set to ON.
- Press the "S" button (1) until the word "ODO" or
"TEMP" appears on the display.
1
- Press the "S" button for more than 4 seconds. The word
"SET" appears on the display and the unit of measure-
ment currently in use flashes.
- Press the "S" button once to change the unit of meas-
urement. Once you have selected the unit of measure-
ment, press the "S" button" for more than 4 seconds to
confirm the set data and go onto the next scale.
The following units of measurement can be set:
Km / mp = the display will show:
- the speed in "km/h" or "mp/h" ;
- the total distance covered in "km" or "mp"
- the partial "TRIP" distance covered in "km" or "mp".
Temperature = °C / °F
Quantity of fuel:
L = (litres) - UG = US/GAL - IG = IM/GAL
- To quit the "SET" stage once you have made your last
setting, press the "S" button for more than 4 seconds. If
not, the program automatically quits after 10 seconds.
> 4"
> 4"
> 4"