Core Chucks; Support Cores; Lower Tension Idler; Rear Table Safety Switch - GBC 2064-WF Instruction Manual

GBC 2064
P
Figure 7
Figure 8
Figure 9
© 2006 General Binding Corporation
O
N
Q
R
Operation Manual
N. Core Chucks: (Fig. 7N)
Bi-Directional Core Chucks grip the Medias
supply tube. Our patented roller core chuck
will allow the operator the ability to add or
remove film with ease.
O. Support Cores: (Fig. 7O)
The Support Cores prevent the Medias Core
Tubes from deflecting by adding extra
support to the Films Core.
P. Lower Tension Idler: (Fig. 7P)
The Lower Tension Idler Guides the lower
lamination onto the Lower Main Roller
insuring a constant amount of wrap on the
Top Main Roller.
Q. Rear Table Safety Switch: (Fig. 8Q)
The Rear Table Safety Switch ensures that
the Rear Table is inserted properly and if not
engaged, the machine will only operate with
the foot switch at 3ft/mn.
R. Front Table Safety Switch: (Fig .9R)
The Front Table Safety Switch ensures that
the Front Table is inserted properly and if not
engaged, the machine will only operate with
the foot switch at 3 ft/mn.
Page 11