Ensure that Bluetooth is set to On.
•
Ensure Bluetooth is enabled in the Cisco Unified Communications Manager; otherwise the option will not be visible in
the settings menu.
Select Add Bluetooth device.
•
Ensure the Bluetooth device is in pairing mode.
Select the Bluetooth device after it is displayed in the list.
•
The Cisco IP Phone 8800 Series will then attempt to pair will attempt to use the pin code 0000.
•
If unsuccessful, enter the pin code when prompted.
Once paired, then the Cisco IP Phone 8800 Series will attempt to connect to the Bluetooth device.
•
Selecting the Bluetooth device then selecting Disconnect will disconnect that currently connected Bluetooth device.
•
Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
90