Toshiba e-Studio 332s Quick Start Manual page 91

c
Press the and
and press .
OK
9
Press the to select [Network
Setting], and then press the .
10
If setting the IP address manually, check
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the to select [Auto], and press
step 15.
11
Enter the IP address using the ten-key
pad, and press
OK
To move to the next box, press the
12
Enter the subnet mask using the ten-key
pad, and press
OK
To move to the next box, press the
13
Enter the default gateway address using
the ten-key pad, and press
To move to the next box, press the
to select [Enter]
. Proceed to
OK
.
.
.
.
.
OK
.
14
Enter the DNS server and WINS server if
needed.
If it is not necessary to connect the DNS server
or WINS server to the network, press
the pop-up message of showing the setting
completion is displayed.
15
When the setup menu screen is
displayed, press
setup.
.
OK
16
For the confirmation message, check
that [Yes] is selected and press
◆ Print the Network Information to check that
the IP address and other network information
are properly set.
1
Press the <SETTING> key on the
operator panel.
2
Check that [Reports] is selected and
press .
OK
3
Press the
press .
OK
4
Press the
Information] and press
5
For the confirmation message, check
that [Yes] is selected and press
The Network Information is printed.
- 91 -
Scanning to Local PC
OK
to complete the
to select [System] and
to select [Network
.
OK
until
4
.
OK
.
OK