Initial Setup For Faxing; Step 1 Setting Country Code - Toshiba e-Studio 332s Quick Start Manual

●

Initial Setup for Faxing

●
This section explains the initial setup necessary for the Fax and Fax from Computer functions.
To set up the machine for the Fax and Fax from Computer functions, follow the 3 steps below:
● "Step 1 Setting Country Code" P.29
● "Step 2 Connecting a Telephone Line" P.30
● "Step 3 Configuring Basic Settings" P.34

Step 1 Setting Country Code

This section explains how to set the country
code. Be sure to select the suitable country code
before connecting the telephone line.
Note
● If you set wrong country code, you may not be able to
send or receive faxes. When you cannot send or receive
faxes even though you have properly connected the
telephone line, check if [Country Code] is set correctly.
1
Hold down the power switch for
approximately one second to turn on the
power.
2
Press the <SETTING> key on the
operator panel.
3
Press the
and then press
4
Enter the administrator password.
The factory default password is "aaaaaa".
a
Press , ,
character you want, and then
press
OK
- The selected character is entered as "*" in
the text filed.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b
Repeat step
required are entered.
c
Press the
and press
- 29 -
Initial Setup for Faxing
to select [Admin Setup]
.
OK
, to select the
.
a
until all characters
and to select [Enter]
.
OK
3