Toshiba e-Studio 332s Quick Start Manual page 113

„ For USB Connection
Follow the procedure below to connect a
USB cable and install a printer driver on your
computer.
‰ For Mac OS X 10.5 to 10.7
Note
● Disable the anti-virus software before starting this
procedure.
1
Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare a USB 2.0 cable separately.
Memo
● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-
Speed connection.
2
Hold down the power switch for
approximately one second to turn off the
power. And turn off the computer.
3
Plug one end of the USB cable into the
USB interface connector on the back of
the machine.
4
Plug the other end of the USB cable into
the computer's USB interface connector.
Note
● Do not plug the USB cable into the network interface
connection. Doing so may cause a malfunction.
5
Hold down the power switch for
approximately one second to turn on the
power. And turn on the computer.
6
Insert "Software DVD-ROM" into the
computer.
7
Double-click the [TOSHIBA] icon on the
desktop.
8
Double-click [Drivers] folder > [PS] or
[PCL] folder > [Installer for MacOSX].
Follow the instructions displayed on the screen to
complete the installation.
9
From the Apple menu, select [System
Preferences].
10
Click [Print & Scan] (Mac OS X 10.5
and 10.6: [Print & Fax]).
- 113 -
Printing from a Computer
5