Toshiba e-Studio 332s Quick Start Manual page 79

3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
6
Press the <SETTING> key on the
operator panel.
7
Press the
press .
OK
8
Enter the administrator password.
The factory default password is "aaaaaa".
a
Press , ,
character you want, and then
press
OK
- The selected character is entered as "*" in
the text field.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b
Repeat step
required are entered.
- 79 -
Scanning to Local PC
to select [Easy Setup], and
, to select the
.
a
until all characters
4