Toshiba e-Studio 332s Quick Start Manual page 50

Faxing from a Computer (For Windows)
„ For USB Connection
Follow the procedure below to connect a USB
cable and install a fax driver on your computer.
Note
● You must be logged in as an administrator to complete
this procedure.
Memo
● You can skip this procedure if the fax driver is already
installed on your computer.
3
1
Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare a USB 2.0 cable separately.
Memo
● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-
Speed connection.
2
Hold down the power switch for
approximately one second to turn off the
power.
3
Plug one end of the USB cable into the
USB interface connector on the back of
the machine.
4
Turn on the computer.
5
Insert "Software DVD-ROM" into the
computer.
6
Click [Run Setup.exe] after [AutoPlay]
is displayed.
If the [User Account Control] dialog box is
displayed, click [Yes].
7
Select the language and then click
[Next].
8
Select the device of your machine, and
then click [Next].
9
Read the license agreement and then
click [I Agree].
10
Read the "Environmental advice for
Users" and click [Next].
- 50 -