14
Settings
8. Repeat the above process for the Subnet Mask and Default Gateway fields.
9. Select OK, then push the joystick to confirm.
10. Press
until all menus are closed.
14.4 Firmware Upgrade
Ensure the system is up-to-date with the latest firmware for optimal performance. There
are two ways to upgrade firmware: from the server, or from a microSD card.
To update firmware from server:
1. Connect the included Ethernet cable from the Ethernet port on the receiver to your
router. The new download icon (
available.
2. Press
, then push the joystick to select Settings.
3. Select Firmware Upgrade.
4. Select From Server, then select Yes.
The system takes a few moments to install the latest firmware, then reboots.
5. Press
until all menus are closed.
To update firmware from microSD card:
1. Insert the microSD card into the included adapter. Insert the adapter into the SD card
reader (not included) on your PC or Mac.
2. Download the latest firmware from www.lorextechnology.com and transfer it to the root
folder on the microSD card.
3. Once the transfer is complete, insert the microSD card into the card slot on the
receiver.
4. Press
, then push the joystick to select Settings.
5. Select Firmware Upgrade and push the joystick to confirm.
6. Select From SD Card.
7. Select Yes.
The system takes a few moments to install the latest firmware.
8. Press
until all menus are closed.
#LX400011; r. 2.0/24200/24203; en-US
) appears on the screen if new firmware is
38