Screen Adjustment; Digital Input; Analog Input; To Adjust Color Gradation Automatically [Range] - Eizo FlexScan EV2313W User Manual

- Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 "To modify blurred characters/lines [Smoothing]". When performing
more advanced adjustment, see "2-3 Color Adjustment"
subsequent pages.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
The Self Adjust function works when all of the following
conditions are satisfied:
• When a signal is input into the monitor for the first time
• When the resolution or Vertical/Horizontal Frequency not
displayed before is set
If the screen is not displayed correctly even after performing the Self Adjust
operation, adjust the screen according to the procedures on the following pages
to use the monitor comfortably.
[Adjustment Procedure]
1
Perform the auto adjustment.
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(2) Choose <Execute> with
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in step
1 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 "To adjust color gradation automatically [Range]".
2
Prepare the display pattern for the analog display adjustment.
Load the "EIZO LCD Utility Disk" to your PC, and then open the "Screen
adjustment pattern files".
16
Chapter 2 Settings and Adjustments
Downloaded from ManualMonitor.com Manuals
19) and
(page
.
or , and press
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments. It is recommended
to turn off the EcoView Sense to
prevent the monitor from shifting to
the power saving mode in this period
(Refer to "2-10 Shifting to the power
saving mode when a person leaves the
monitor [EcoView Sense]" on
25).
• Auto adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).
Attention Attention
• This function works correctly when • This function works correctly when
an image is fully displayed over the an image is fully displayed over the
Windows or Macintosh display area. Windows or Macintosh display area.
It does not work properly when an It does not work properly when an
image is displayed only on a part of image is displayed only on a part of
the screen (command prompt window, the screen (command prompt window,
for example) or when a black for example) or when a black
background (wallpaper, etc.) is in use. background (wallpaper, etc.) is in use.
• This function does not work correctly • This function does not work correctly
with some graphics boards. with some graphics boards.
NOTE NOTE
• For details and instructions on opening • For details and instructions on opening
the "Screen adjustment pattern files", the "Screen adjustment pattern files",
refer to the "Readme.txt" file. refer to the "Readme.txt" file.
page