●
To switch the input signal
The input signal switches each time
When the signal is switched, the active input port name appears at the top right
corner of the screen.
●
To set input signal selection [Input Signal]
Setting
Auto
Manual
[Input signal setting]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
(3) Select "Auto" or "Manual" with
The setting is completed.
Chapter 3 Connecting Cables
Downloaded from ManualMonitor.com Manuals
is pressed.
Function
The monitor recognizes the connector through which
PC signals are input.
When a PC is turned off or enters the powersaving
mode, the monitor automatically displays another
signal.
The monitor detects only the PC's signals currently
displaying automatically. Select an active input signal
with
.
or
, and press
NOTE
NOTE
• When "Auto" is selected for
• When "Auto" is selected for
<InputSignal>, the monitor's power-
<InputSignal>, the monitor's power-
saving function works only when all
saving function works only when all
PCs are in the power-saving mode.
PCs are in the power-saving mode.
.
.
.