Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Eizo FlexScan EV2360-WT o cerca il tuo prodotto tra le migliori offerte di Monitor LCD User’s Manual Color LCD Monitor Important Please read this “User’s Manual”, and “PRECAUTIONS” (separate volume) carefully to familiarize yourself with safe and effective usage.
Page 2
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
When the screen becomes dark or begins to flicker, please contact your local EIZO representative. Do not press on the LCD panel or edge of the frame strongly, as this may result in display malfunctions, such as interference patterns, etc.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the monitor.
CONTENTS Notice for this monitor ......... 3 Chapter 5 Troubleshooting ......28 Cleaning ..............4 5-1. No Picture ............ 28 To use the monitor comfortably ......4 5-2. Imaging Problems (Both Digital and Analog) ............29 CONTENTS ............. 5 5-3. Imaging Problems (For Analog Only) ..
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features ● High Degree of Flexibility for Installation • This product can be used as an external monitor of a notebook computer. • By attaching the monitor to an arm, the screen can be rotated 180° (upward-downward rotation) and used in a multi-monitor configuration.
● Reduction of Power Consumption This product provides a function that automatically adjusts the screen brightness to reduce power consumption . Power Reduction, CO Reduction, and Eco Performance Level can be checked on the "EcoView Settings" menu. (page • Auto EcoView The ambient light sensor on the front of the monitor detects the ambient brightness to automatically adjust the screen brightness to a comfortable level.
1-2. Controls and Functions ● Front 1. Ambient light sensor Detects ambient brightness. If you use Auto EcoView, the screen brightness is automatically adjusted according to the ambient brightness (page 14). 2. Operation switches Displays menus. Operate the switches according to the operation guide (page 16).
● Rear 6. Handle This handle is used for transportation. 7. Security lock slot Complies with Kensington’s MicroSaver security system. 8. Lock button Use this button to remove the monitor from the stand. 9. Headphone jack Connects to headphones. 10. Stereo mini jack If you connect an external device using the stereo mini jack cable, external audio can be output from the monitor.
1-4. Changing the Computer Display Settings If the image is not displayed properly after connecting the monitor to a PC, follow the procedure below to change the display settings on the computer. ● Windows 10 1. Right-click the mouse anywhere on the desktop except on icons. A menu is displayed. 2.
Chapter 2 Basic Adjustment / Setting This product enables users to change the brightness according to personal preference or to suit the usage environment, and to reduce power consumption to conserve energy. This chapter describes the basic functions that can be adjusted and set using the switches on the front of the monitor.
2-3. Switching Display Modes (Color Modes) This product is preinstalled with color modes for various display purposes. By switching the mode according to the purpose and contents of the display, you can display images in an appropriate manner. ● Display Modes Color Mode Purpose User1...
2-4. Conserving Energy This monitor is equipped with EcoView functions to enable users to conserve energy. If you use Auto EcoView, which is one of the EcoView functions, the screen brightness is automatically adjusted according to the ambient brightness. Setting Function Description Value...
2-5. Adjusting Brightness The brightness of the screen can be adjusted to suit the installation environment or personal preference. The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Setting Value 0 to 100 2-6.
Chapter 3 Advanced Adjustment / Setting This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu. For basic functions, see “Chapter 2 Basic Adjustment / Setting” (page 12). 3-1. Basic Operation of the Setting Menu Menu display 1.
3-2. Setting Menu Functions ● Color Adjustment The color mode settings can be adjusted according to personal preference. Functions that can be adjusted differ depending on the color mode. √: Adjustable -: Not adjustable Color Mode Function User1 sRGB Paper Movie DICOM User2...
Page 18
Setting Function Description Value Color Mode User1 Select the desired mode according to the monitor application. User2 The color mode settings can also be adjusted according to personal sRGB preference. Select the mode for adjustment and perform adjustment Paper using the relevant functions. Movie Note DICOM...
Page 19
Setting Function Description Value Advanced Overdrive Enhanced This function allows you to set the overdrive intensity based on the Settings Standard use of the monitor. Image lag can be reduced by using the “Enhanced” setting when displaying moving images. Note •...
● Signal Settings Set the details regarding input signal, such as the screen display size and color format. • For D-Sub input • For DisplayPort input Function Setting Value Description Picture Expansion Auto The screen size of the monitor display can be changed. Full Screen •...
Page 21
Function Setting Value Description Sharpness -2 to 2 When a low resolution image is displayed using picture expansion mode (“Full Screen” or “Aspect Ratio”), the text and lines of the image may appear blurry. This blurriness can be reduced by configuring the settings for sharpness. Note •...
Page 22
Function Description Analog Auto Screen flickering, display position, and size can be adjusted automatically. Adjustment Screen Selecting “Auto Screen Adjust” displays a message. Select “Yes” to enable this Adjust function. Note • The automatic screen adjustment function works correctly when an image is fully displayed over the entire displayable area of the screen.
● Preference Settings The monitor’s settings can be configured to suit the usage environment or personal preference. Setting Function Description Value Menu Rotation 0° When the monitor is used in a vertical position, the direction of the Setting 90° menu can also be changed. 270°...
● Language The display language for menus and messages can be selected. Setting Value English, German, French, Spanish, Italian, Swedish, Japanese, Simplified Chinese, Traditional Chinese Attention • The display language of the “Administrator Settings” menu cannot be changed. ● Information Monitor information (product name, serial number, firmware version, usage time, resolution, and input signal) can be checked.
Chapter 4 Administrator Settings This chapter describes how to configure monitor operation using the “Administrator Settings” menu. 4-1. Basic Operation of the “Administrator Settings” Menu Menu display 1. Touch to turn off the monitor. 2. While touching the leftmost switch, touch for more than 2 seconds to turn on the monitor.
• When the power to the monitor is turned off, a device connected to the USB downstream port does not work. On-Screen Logo When the monitor is turned on, the EIZO logo appears on the screen. When this function is set to “Off”, the EIZO logo does not appear.
Page 27
Function Setting Value Description Key Lock In order to prevent changes to settings, the operation Menu switches on the front of the monitor can be locked. • “Off” (default setting) Enables all switches. • “Menu” Locks the switch. • “All” Locks all switches except the power switch.
Chapter 5 Troubleshooting 5-1. No Picture Problem Possible cause and remedy 1. No picture • Check whether the power cord is connected properly. • Power indicator does not light up. • Turn on the main power switch on the rear side of the monitor. •...
17)). (The LCD monitor backlight has a limited life span. If the screen becomes dark or begins to flicker, contact your local EIZO representative.) • If the screen is too bright, try changing the Auto EcoView setting to “On”. The monitor detects the ambient brightness to adjust the screen brightness automatically (see “Auto EcoView”...
5-3. Imaging Problems (For Analog Only) Problem Possible cause and remedy 1. Display position is incorrect. • Use “Position” in the Setting menu to correct the image position (see “Hor. Position”, “Ver. Position” (page 22)). • If the problem persists, use the graphics board’s utility if available to change the display position.
26)). • If the peripheral devices work correctly when they are directly connected to the PC, contact your local EIZO representative. • Depending on the USB 3.1 Gen 1 host controller you are using, the connected USB device may not be recognized properly. Update to the latest USB 3.1 Gen 1 driver provided by the manufacturer, or...
Chapter 6 Attaching/Removing the Stand 6-1. Removing the Stand The stand section of this product can be removed. Attention • Do not move the stand up and down after removing it. If you move the stand up and down while it is not attached to the monitor, this may cause damage or injury.
6-2. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the supported optional arm (or optional stand). www.eizoglobal.com Attention • When attaching an arm or stand, follow the instructions of the respective User’s Manual. •...
6-3. Attaching the original stand Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the LCD panel surface facing down. Remove the fixing screws on the optional arm (or optional stand), and detach the optional arm (or optional stand).
6-4. Removing the Stand Base The stand base that was attached during setup can be detached using the following procedures. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the LCD panel surface facing down. Raise the lever on the bottom of the stand base.
6-5. Attaching the Stand Base The once removed the stand base can be attached to the monitor again with the following procedures. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the LCD panel surface facing down. Hold the stand base so that the back label ( ) is aligned as shown in the diagram, and attach the stand base onto the stand brace.
Chapter 7 Reference 7-1. Connecting Multiple PCs This product can be connected to multiple PCs and allows you to switch between the connections for display. ● Connection examples D-Sub MD-C87 D-Sub D-Sub cable (D-Sub - D-Sub) (Separately sold accessory) HDMI HH200HS HDMI HDMI cable (HDMI - HDMI)
7-2. Using the USB Hub Function This monitor is equipped with a USB hub. It functions as a USB hub when connected to a USB- compatible PC, allowing the connection of peripheral USB devices. ● Connection procedure 1. Connect the USB downstream port of the computer and the USB upstream port of the monitor with a USB cable.
Physical Dimensions 499.0 mm × 340.4 mm to 455.0 mm × 258.9 mm to 271.4 mm Specifications (W × H × D) (Tilt: 35˚) 499.0 mm × 333.9 mm to 473.9 mm × 233.0 mm (W × H × D) (Tilt: 0˚) Dimensions 499.0 mm ×...
United States and other countries. EIZO, the EIZO Logo, ColorEdge, CuratOR, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries. ColorEdge Tablet Controller, ColorNavigator, EcoView NET, EIZO EasyPIX, EIZO Monitor Configurator, EIZO ScreenSlicer, G-Ignition, i•Sound, Quick Color Match, RadiLight, Re/Vue, SafeGuard, Screen...