Backlights And Indicators - Honeywell MX3Plus User Manual

Backlights and Indicators

Across the top of the keypad are LEDs (Light Emitting Diodes) that provide visual cues to current MX3Plus operation. When
the LED is not illuminated, the function is inactive.
LED
2nd
ALT
CTRL
SHFT
CAPS
STAT
SCNR
BATT B
BATT M
CHGR
The next keypress is a 2nd keypress. Amber when on. Blinks amber during configuration key
sequence.
The next keypress is an ALT keypress. Amber when on and unlit when off.
The next keypress is a CTRL keypress. Amber when on and unlit when off.
The next letter is the uppercase letter on alpha keys and the shifted character on the numeric keypad
keys. Amber when on and unlit when off.
Uppercase letters are active until the CAPS key sequence is pressed again. Amber when on and
unlit when off.
Status Indicator. Amber when device is booting up. Blinking Green when display Suspend state
begins.
Bar code scanner function, affected by both tethered scanners and the scanner endcap.
• Red - scanning.
• Green - good scan.
• Unlit - scanner is inactive.
Backup Battery. When illuminated, the backup battery is charging. When unlit, the backup battery is
not charging.
Main Battery. When illuminated, main battery capacity is low.
• Red – low battery.
• Blinking Red – power fail.
• Unlit - Main battery is not low OR all charge is depleted in both batteries.
Charger. When on, the MX3Plus is receiving external power either from the DC power jack or the
MX3Plus is seated in a powered cradle.
• Red - Main battery is charging.
• Amber – Fault or temporary standby (Contact
• Green - battery charge is complete and the MX3Plus is connected to external power through the
power jack or a powered cradle.
When illuminated . . .
Technical Assistance).
2-5