Attach Stylus Tether And Sleeve - Honeywell MX3Plus User Manual

Attach Stylus Tether and Sleeve

The stylus kit includes the stylus, tether and sleeves. The tether allows the stylus to be mounted to the MX3Plus and the
sleeve provides storage for the stylus when not in use.
Determine a convenient location for the stylus sleeve.
Carefully remove the paper backing from the Stylus Clip sticky. Firmly press the sticky side of the clip onto the MX3Plus and
hold it in place for 15 seconds. Thread the tether through the end of the stylus and tie the ends firmly to the Stylus Clip so that
the ends don't interfere with placing the stylus in the Stylus Clip. Place the stylus in the Stylus Clip when not in use. An extra or
replacement stylus can be ordered from Honeywell.
2-17