Table of Contents
Advertisement
type D: after-market actuators
In order for this system to control one or more after-market actuators, a DEI 451M or
two relays (optional) are required. Vehicles without factory power door locks require
the installation of one actuator per door. This requires mounting the door lock actua-
tor inside the door. Other vehicles may only require one actuator installed in the dri-
ver's door if all door locks are operated when the driver's lock is used.
The fuse used on 12 volt inputs should be 7.5A per motor installed in the vehicle.
13
© 2003 directed electronics, inc.
Advertisement
Table of Contents
