Sony PCS-VCS Operating Instructions Manual page 16

Setting Category
FT Connection
FT Tunnel Type
[Forwarding] Tab
Setting Category
Set
Condition
Action
Forwarding Type
Forwarding
Destination
16
Creating a User
Description
Select the Firewall Traversal setting.
Autodetect FT: Automatically determine whether Firewall
Traversal is necessary when connecting to the HD VISUAL
COMMUNICATION SERVER, and connect via the FT personal
client only if necessary.
Autodetect GC: Automatically determine whether Firewall
Traversal is necessary when connecting to the HD VISUAL
COMMUNICATION SERVER, and connect via the FT group
client only if necessary.
Use FT: Always use the FT personal client when connecting to
the HD VISUAL COMMUNICATION SERVER.
Use GC: Always use the FT group client when connecting to the
HD VISUAL COMMUNICATION SERVER.
NONE: Connect without using Firewall Traversal.
Note
FT personal clients can only be used from a PC Endpoint terminal.
Therefore, [Autodetect FT] and [Use FT] cannot be used from an
H.323 terminal.
Select the tunnel type for Firewall Traversal. Configure this only
when using Firewall Traversal.
NONE: Do not specify a tunnel type.
TCP: Connect using a TCP tunnel.
UDP: Connect using a UDP tunnel.
Description
Select the checkbox to enable the [Action], [Forwarding Type],
and [Forwarding Destination] settings. This can be configured for
each [Condition].
Indicates the status; [Busy], [Online] (User can be called), or
[Offline] (User cannot be called). The [Action], [Forwarding
Type], and [Forwarding Destination] settings can be configured
for each status.
Select the [Confirm], [Reject] or [Forward] Action when
answering calls.
Select the forwarding destination type when selecting [Forward]
as an [Action]
H.323 Alias: When selecting an H.323 Alias as a forwarding
destination.
E.164 Number: When selecting an E.164 Number as a
forwarding destination.
IP Address: When selecting an IP Address as a forwarding
destination.
When selecting [Forward] as an [Action], enter a forwarding
destination that complies with a type specified in the [Forwarding
Type].