Replacing The Batteries - Lifescan OneTouch Profile blood glucose monitor Owner's Booklet

Press forward on the base of the test strip
holder to be sure it is properly in place.
M
You are now ready to do a check strip
test. If the check strip will not slide into
the test strip holder, repeat Step 4.
C
66

REPLACING THE BATTERIES

The One Touch
™
with batteries already installed. When
the batteries need to be replaced, use
two AAA, 1.5 volt, alkaline batteries.
The batteries should last about one year
when testing up to 4 times a day. When
the battery symbol appears on the meter
display, the batteries are getting low.
The meter will still provide accurate test
results with low batteries, but they
should be replaced as soon as possible.
Profile Meter comes
™