On/off button. This button turns the meter
on and off.
Display. This is where you read the simple
messages that guide you through test-
ing, setting options, and using the
memory. Your test results will be dis-
played here.
M Button. The One Touch
Meter automatically stores your test
results. Use the M button to recall the
information stored in your meter's
memory and to review your meter's
set-up options.
C Button. Use the C button to set the code
on the One Touch Profile Meter and
to change the meter's set-up options.
Test strip holder. The test strip holder holds
Test area. The test area is located under the
Battery compartment. Holds two AAA
Profile
™
™
Data port. Allows you to transfer the infor-
7
a One Touch
Test Strip in place
™
when you perform a blood glucose or
control solution test.
test strip holder.
batteries. The batteries are already
installed in your meter.
mation stored in the meter's memory
to a computer to view, analyse, and
print. Please call your authorized
LifeScan representative for more
information about our Diabetes
Management System software.