Lifescan OneTouch Profile blood glucose monitor Owner's Booklet page 65

Step 2: Clean the test strip holder.
Wash the test strip holder with soap and
water.
Clean the underside of the test strip hold-
er. Using a cotton swab, clean the small
hole to remove any dirt, blood, or lint.
Rinse well.
Dry completely with a soft cloth or tissue.
Step 3: Clean the test area.
CAUTION:
Do not use the following agents for
cleaning, as they will damage the
meter:
• Alcohol
• Cleansers with ammonia or phenol
• Glass cleaners
• Abrasive cleaners
Check the clear,
protective coating
over the test area to
make sure it is not
scratched or dam-
aged.
64
M C