Lifescan InDuo blood glucose meter User Manual page 16

12
GETTING YOUR InDuo
(Example)
SYSTEM READY FOR USE
TM
Coding your InDuo
Code numbers are used to calibrate the OneTouch
Ultra test strips with the InDuo
code the InDuo
time, and then every time you change to another vial
of OneTouch
blood glucose test, check that the code number on
the meter display matches the code number on the
OneTouch ®
CAUTION: If the code numbers do not match, your
blood glucose tests may be inaccurate.
Entering the code mode
• Start with the InDuo
• Insert a OneTouch
meter. Push the test strip in until it will go no
further.
• All segments of the meter display will appear.
When you first use the InDuo
will appear, showing there is no code stored in the
meter memory.
meter
TM
TM
TM meter before using it for the first
® Ultra test strips. Each time you do a
Ultra test strip vial.
meter turned off.
TM
® Ultra test strip to turn on the
TM
®
meter. You must
meter, 3 dashes Q