Lifescan InDuo blood glucose meter User Manual page 14

10
GETTING YOUR InDuo
Top edge
Apply a sample here,
where the narrow
channel meets the
top edge of
OneTouch ® Ultra
test strip.
Confirmation
window
This is where you
confirm if a large
enough sample
has been applied
to the top edge.
Contact bars
Insert this end of
OneTouch ® Ultra
test strip into the
InDuo meter.
TM
SYSTEM READY FOR USE
TM
æ OneTouch
Your InDuo
TM
OneTouch ®
• Store the OneTouch
cool, dry place below 30°C (86ºF). Keep away from
direct sunlight and heat. Do not refrigerate.
• Store your OneTouch
original vial only; do not transfer them to a new
bottle or any other container.
• After removing a OneTouch
the vial, immediately replace the vial cap and close
it tightly.
• With clean, dry hands, you may touch the test
strip anywhere on its surface when removing it
from the vial or inserting it into the meter.
• Use each OneTouch
after removing it from the vial.
• Write the discard date on the vial label when you
open it for the first time. Discard remaining
OneTouch
after the vial was first opened.
® Ultra test strips
meter is designed for use with
Ultra test strips only.
® Ultra test strip package in a
® Ultra test strips in their
®
® Ultra test strip immediately
® Ultra test strips and the vial 3 months
Ultra test strip from