Control System; Adjusting The Throttle Link; Adjusting The Throttle Cable - Yamaha F30A Service Manual

Control system

Adjusting the throttle link

1. Loosen the throttle link adjusting screw
1.
1
NOTE:
The throttle link adjusting screw 1 has left-
hand threads, therefore, turn it clockwise to
loosen it.
2. Turn the throttle cam 2 to the fully open
position and contact it to the accelerator
lever 3, and then hold it in place.
3. Turn the carburetor #3 throttle lever 4
clockwise so that it contacts the carbure-
tor body 5 as shown.
4. Turn the throttle link lever 6 counter-
clockwise until there is no free play in the
throttle link rod 7.
5. Tighten the throttle link adjusting screw
1.
67C3K11
1
6
7
6. Turn the throttle grip (H model) or move
the remote control lever (R model) to the
fully open and fully closed positions and
S67C3019
check that the throttle cam operates
smoothly.
NOTE:
After adjusting the throttle link, adjust the
throttle cable. See "Adjusting the throttle
cable" (3-8).

Adjusting the throttle cable

NOTE:
Adjust the throttle link before adjusting the
throttle cable.
1. Loosen the locknut 1, remove the clip
S67C3024
2, and then disconnect the throttle cable
joint 3.
Power unit / Control system
5
4
3
2
S67C3061
2 3 1
S67C3020
1
2
3
4
5
6
7
8
9
3-8