Checking The Rectifier Regulator (E And W Model) - Yamaha F30A Service Manual

Hide thumbs Also See for F30A:
Table of Contents

Advertisement

Lighting coil output peak voltage (6 A
model):
Yellow (Y) – Yellow (Y)
Unloaded
r/min
Cranking
1,500
DC V
14.1
Lighting coil output peak voltage (15
A model):
Yellow (Y) – Yellow (Y)
Unloaded
r/min
Cranking
1,500
DC V
8.4
3. Measure the lighting coil resistance.
Replace if out of specification.
Lighting coil resistance (6 A model)
(reference data):
Yellow (Y) – Yellow (Y)
0.9–1.1 Ω at 20 °C (68 °F)
Lighting coil resistance (15 A model)
(reference data):
Yellow (Y) – Yellow (Y)
0.26–0.28 Ω at 20 °C (68 °F)
4. Connect the lighting coil connectors.
Checking the Rectifier Regulator (E
and W model)
1. Measure the Rectifier Regulator 1 out-
put peak voltage. Check the Rectifier
Regulator for continuity if the output peak
voltage is below specification.
67C3K11
Engine electric control system / Charging system
3,500
39.7
95.2
3,500
28.5
66.6
Y
Y
Y
Y
Gy
B
NOTE:
• Measure the Rectifier Regulator output
peak voltage with the connector (R) 2 dis-
connected.
• Do not use peak voltage adapter B when
measuring the Rectifier Regulator output
peak voltage.
• Be sure to check the lighting coil before
measuring the Rectifier Regulator output
peak voltage.
Rectifier Regulator output peak
voltage:
Red (R) – Ground
Unloaded
r/min
1,500
DC V
13
2. Disconnect the Rectifier Regulator con-
nectors and terminal.
1
2
R
3
R
1
2
S67C8059
4
5
6
7
3,500
13
8
9
8-26

Advertisement

Table of Contents
loading

This manual is also suitable for:

F40b

Table of Contents