Table of Contents
Advertisement
SETUP (Continued)
SETTING THE VCR FUNCTIONS
The SELECTION MENU 1 screen allows you to select the VCR operations and functions to match the appli-
cations.
S
ELECT
I ON
M
ENU
[
]
V I D O
E
MODE
:
AU
O T
CA
M
E
R
A S
W
:
12
~
1. Press the START/STOP button.
The VIDEO MODE option "AUTO" flashes on/off.
2. Press the SET button repeatedly until the item
the setting of which you want to change flashes.
3. Press the UP or DOWN button to select the value
or setting you want.
4. After selecting, press the START/STOP button.
15
VIDEO MODE (AUTO, COLOUR, B/W)
• Use during recording or playback if the video signal is unstable,
etc.
AUTO:
The unit automatically detects the type of the video
input or playback signal and switches to the colour
or black-and-white video signal mode, as appro-
priate.
COLOUR:
Selects the colour video signal mode.
B/W:
Selects the black-and-white video signal mode.
CAMERA SW (12~, ALL, 03 ONLY)
• You can select the timing with which pulses are output to
switch the camera.
12~:
The pulses are output during recording at 12 or a
longer speed mode.
ALL:
The pulses are output during recording in all modes.
03 ONLY:
The pulses are output during recording at the 03
speed mode.
SELECTION MENU 1 Format Description
AVR24TLAX (E) QR34283
Advertisement
Table of Contents
