Table of Contents
Advertisement
CONTROLS AND FUNCTIONS (Continued)
[DISPLAY]
26
27
T A B
REC
35
26. TAPE-IN INDICATOR
Lights when a cassette is in the compartment.
27. TAB INDICATOR
Lights when a cassette without its safety tab is loaded.
28. ALARM INDICATOR
ALARM appears during alarm recording.
ALARM flashes when alarm recording ends.
29. TAPE END INDICATOR
Lights when the tape reaches the end during
recording.
Note: "TAPE END" is not displayed when you have
selected
REWIND,
RE-REC
FUNCTIONS" menu in the alarm display or you have
selected REWIND, STOP IF ALARM but an alarm
recording has not been made.
30. A INDICATOR
Lights when no video signal is input. Video signal
input will turn this indicator off automatically.
31. TIMER INDICATOR
This is lit during timer recording or TIMER stand-by
mode.
The indicator flashes in the following cases.
• A cassette is not loaded.
• A cassette without its safety tab is loaded.
• The timer has not been programmed.
32. LOCK INDICATOR
LOCK appears when the recorder is in the security
lock mode.
33. HARD INDICATOR
Lights when adjust the picture quality to hard during
playback mode and after setting.
5
28
29
30 31
ALARM
TAPE END
A
INDEX
TIMER
36
37
34. SOFT INDICATOR
35. VCR MODE INDICATORS
in
the
"RECYCLE
36. INDEX INDICATOR
37. DIGITAL COUNTER
38. TAPE SPEED INDICATOR
AVR24TLAX (E) QR34283
32
33
HARD
LOCK
SPEED
SOFT
38
Lights when adjust the picture quality to soft during
playback mode and after setting.
•
appears during recording.
REC
• t t
appears during the rewind mode.
• s s
appears during the fast forward mode.
• t t
(or s s) flashes during visual search.
• s
appears during the playback mode.
• t
appears during the reverse play mode.
•
appears when the PLAY/STILL button is
pressed during play mode and disappears
when the PLAY/STILL button is pressed
again.
• t
(or s) appears while the JOG DIAL is turn
reverse (or advance) in the still playback
mode.
Note: Still playback is restored when the jog
dial is released.
INDEX appears when the ALARM INDEX button is
pressed.
INDEX disappears when the ALARM INDEX button is
pressed again.
INDEX flashes during alarm indexing.
Shows the tape counter. The counter does not count
during non-recorded sections of a tape.
In low temperature, display speed may be slow. The
count of a counter is ensured.
Shows the tape speed.
34
Advertisement
Table of Contents
