Function Buttons - Bernina Bernette 20 Instruction Manual

28
Display Explanation & Operating Instructions

Function Buttons

Start/stop button
Press the start /stop button to start the
machine. Press again to stop it.
machine will rotate slowly at start of sewing.
This way you may operate the machine
without foot control.
When the machine is sewing or winding the
bobbin, the start /stop symbol will display.
Reverse button
Reverse is pressed to sew in reverse.
The machine will display the symbol "
indicates reverse sewing.
Only the pattern 01-05 and 24 can be
in reverse.
The machine will permanently sew in reverse.
Press the button again to sew forward.
If you press and release the button before
starting to sew, the machine will permanently
sew in reverse and press the button again to
sew forward.
Auto-lock button and single pattern
When the patterns 01-05 and 24
the machine will immediately sew 3 locking
stitches when the auto-lock button is pressed,
then automatically stop.
The machine will display the symbol "
until the machine is stopped.
Except for the pattern 01-05, 10, 24 and 50-
60 , press the auto-lock button, the machine
will sew 3 locking stitches at the end of the
current pattern and automatically stop.
The machine will display the symbol "
until the machine is stopped. The function
will be cancelled if you press the button once
again or select another pattern.
The
"
sewn
are selected,
"
"