Changing The Presser Foot - Bernina Bernette 20 Instruction Manual

Changing the Presser Foot

a
b
e
c
d
d
f
e
Attention:
Turn power switch to off ("O") when carrying out any of the
below operations!
Attaching the presser foot holder
Raise the presser foot bar (a).
Attach the presser foot holder (b) as illustrated.
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly
above the pin (d).
Press the black lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically.
Removing the presser foot
Raise the presser foot.
Press the black lever (e) and the foot will disengages.
Attaching the
Attach the edge/quilting
g
Adjust according to need for hems, pleats, etc.
edge/quilting guide
guide (g) in the slot as illustrated.
Machine Setup 19