Bernina Bernette 20 Instruction Manual page 72

Review stored stitches
Precondition: with existing patterns in Memory
Press the memory button to enter the
Memory Review/Edit Mode, the screen
shows the stitch of the 1st memory position.
1st memory position
2nd memory position
by stitch
Use selector wheel to navigate to different
stitches and to review the parameters set.
1st memory position
by mem position
Press set/disp button to change to mem
position display.
During Memory Review/Edit Mode the display
can always be switched between mem Pos
and stitch display with the set/disp button.
3rd memory position
Use selector wheel to navigate to different
mem positions.
Press start/stop or foot controller to start
continuously sewing from the current position
in memory.
Special Functions
Please Note:
Please Note:
71