Description Of System Channel - Furuno FS-1503 Service Manual

Description of System Channel

1. 9900 (Country)
System settings 9903 and above are preset to default values depending on local rules
and regulations.
2. 9902 (TX power data clear)
Power data is changed to default settings as below.
⋅ Standard, USA HIGH: 220 (150 W) LOW: 140 TUNE: 40
⋅ Thai
3. 9903 (TX frequency)
⋅ 0: Free:
⋅ 1: ITU/ROM:
⋅ 2: ROM:
⋅ 3: Marine Free: Frequencies can be selected in the following range. ITU and User
4. 9904 (RX frequency)
⋅ 0: Free:
⋅ 1: ITU/ROM:
⋅ 2: ROM:
⋅ 3: Marine Free: Frequencies can be selected in the following range. ITU and User
5. 9905 (ITU channel)
Refer to appendix 2 for ITU channel list.
HIGH: 170 (100 W) LOW: 140 TUNE: 40
Frequencies can be selected in the range of 1.6065 MHz to 29.9999
MHz. ITU and User channels are also available.
ITU and User channels are available.
User channel only
channels are also available.
1606.5 – 4438; 6200 – 6525;
16360 – 17410; 18780 – 19800; 22000 – 22855; 25070 – 26175 kHz
Frequencies can be selected in the range of 0.1000 MHz to 29.9999
MHz. ITU and User channels are also available.
ITU and User channels are available.
User channel only
channels are also available.
1606.5 – 4438; 6200 – 6525;
16360 – 17410; 18780 – 19800; 22000 – 22855; 25070 – 26175 kHz
4-4
8100 – 8815; 12230 – 13200;
8100 – 8815; 12230 – 13200;