Line Feed; Start-Up; Paper - KERN YKN-01 Operating Instructions Manual

5.3 Line feed

Press the „LF" button in standby mode ("SEL" display off); this makes the line feed
start without data being printed. To stop the line feed, again press the „LF" button.

5.4 Start-up

The printer will be ready for operation immediately after it has been connected to
the power supply; the LED "P" will light up.

5.5 Paper

⇒ Fold over one end of the paper before
inserting it into the printer
Inserting the paper
⇒ Insert the folded-over end of the paper
into the mechanism
⇒ Turning on the printer supply
⇒ Press and hold the „LF" key until the
paper emerges from the outlet slot of
the mechanism
Tearing off paper
⇒ Pull the printout across the direction of printout that
it rests on the cutter bar of the printer housing
Do not pull printout upwards.
YKN-01-BA-e-1411 7