User Menu Settings - Life Fitness T9i Operation Manual

5.3 U M
SER ENU
SETTING
USER STATISTICS
Select User
MY WORKOUTS 1-7
Statistics
MILES
CALS
TIME
MY CONFIGURATION
ENGLISH/METRIC UNITS
CUSTOM WORKOUT ENTRY
MAXIMUM SPEED
PAUSE TIMEOUT
WATTS DISPLAY
METS DISPLAY
PACE DISPLAY
CALORIE PER HOUR DISPLAY ON (Int'l: OFF)
DISTANCE CLIMBED DISPLAY
ERASE CUSTOM WORKOUTS
MAXIMUM INCLINE
START MESSAGE SETUP
SYSTEM BEEPS
SOFTWARE VERSION NUMBERS
CONSOLE VER:
MOTOR VER:
S
ETTINGS
DEFAULT RANGE
VALUE
My Workouts X
XXXX.XX
XXXXXXX
XXXX:XX
ENGLISH
N/A
12.0 (MPH)
5 (minute)
OFF (Int'l: ON)
OFF
ON
OFF
N/A
15.0
N/A
ON
XX.X
XX.X
DESCRIPTION
Mode displays accumulated statistics of up to seven
different users.
Use SELECT ARROW keys to select 1 of 7 users.
Press ENTER to access accumulated statistics of the
selected user.
Total accumulated distance - displayed in miles, and
percentage of miles.
Total accumulated workout calories.
Total accumulated workout time - displayed in
hours: minutes.
Mode allows 13 settings to be adjusted and saved
The measurement unit type for weight, distance, and
speed.
See Programming Custom Workouts in this Section.
This is the fastest speed at which the treadmill can operate.
This is the maximum time during which a workout can
remain in pause mode.
If this option is enabled, the MESSAGE CENTER displays
the Watts equivalent of the step rate.
If this option is enabled, the MESSAGE CENTER displays
the METs equivalent of the step rate.
This feature displays the rate of minutes per mile.
If this option is enabled, the MESSAGE CENTER displays
the number of calories burned per hour during the workout.
The total distance climbed, based on the incline and speed
of the treadmill.
This option erases all custom workouts in a single step.
This option changes the maximum incline grade to a value
lower than 15 percent.
See "Using the START MESSAGE Setup" in this section.
Enable/Disable System Beeps outside of diagnostics
(system beeps within diagnostics cannot be disabled)
Mode shows software version for console and motor
controller.
Displays software version for the console board.
Displays software version for the motor controller board.
†
39