CHAPTER 3
MAINTAINING YOUR CAPTURE BOARD
Transporting your capture board
Save your original packaging to repack your capture board if needed. This packaging was
designed with optimal shock and vibration protection. If your original packaging isn't available, you
can purchase the same packaging directly from your authorized SMART reseller.
CAUTION
Transport your capture board only in original or replaced packaging. Transporting your capture
board without correct packaging voids your warranty and could lead to product damage.
Replacing the markers and eraser
Your capture board comes with three dry erase markers and one eraser.
If you misplace the markers or if they run dry, you can replace them with third-party dry erase
markers. The barrel of third-party dry erase markers can be any length and diameter, but the tip
and nib must be within the following dimensions:
If you misplace the eraser, you can purchase a replacement from the Store for SMART Parts
(see smarttech.com/Support/PartsStore).
18
smarttech.com/kb/170769