Source And Destination Addresses - ZyXEL Communications Prestige 660W Series User Manual

LABEL
Destination Address
Services
Edit Available
Service
Action for Matched
Packets
Log
Alert
Back
Apply
Cancel
Delete

13.6.1 Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an
existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous
screen. Either action displays the following screen.
Creating Custom Rules
Table 13-3 Creating/Editing A Firewall Rule
Click DestAdd to add a new address, DestEdit to edit an existing one or
DestDelete to delete one.
Select a service in the Available Services box on the left, then click >> to select.
The selected service shows up on the Selected Services box on the right. To
remove a service, click on it in the Selected Services box on the right, then click
<<.
Click this button to go to the Customized Services screen.
Refer to Chapter 14 for more information.
Use the drop down list box to select whether to Block (silently discard) or Forward
(allow the passage of) packets that match this rule.
This field determines if a log is created for packets that match the rule (Match),
don't match the rule (Not Match), match either rule (Both) or no log is created
(None).
Select the Alert check box to determine that this rule generates an alert when the
rule is matched.
Click Back to return to the previous screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to exit this screen without saving.
Click Delete to remove the current rule.
Prestige 660W/HW series User's Guide
DESCRIPTION
13-11